hamburger

Elastic Constants: Definition, Formula [Gate Notes]

By BYJU'S Exam Prep

Updated on: September 25th, 2023

Elastic constants are the parameters used to understand an elastic body’s behaviour. Elastic constants are the dimensional constants that establish the relation between strain and stress in a body.

When an elastic body is subjected to a deforming force, in such a case, deformation of the body can be found by using elastic constants. In this article, we will discuss various elastic constants and the relation between different elastic constants.

Download Complete SOM Formula Notes PDF

What are Elastic Constants?

Elastic constants are the constants which describe the mechanical response of an elastic material when it is subjected to different kinds of loads. Based on the type of stress and strain, Elastic constants can be classified into 4 types. These Elastic constants are mentioned below.

  1. Young’s Modulus of elasticity (E)
  2. Bulk Modulus (K)
  3. Modulus of rigidity (G)
  4. Poisson’s ratio (μ)

Young’s Modulus of Elasticity (E)

Young’s modulus of elasticity is an elastic constant that is defined as the ratio of Longitudinal stress to longitudinal strain. When an axial load P is applied along the bar’s longitudinal axis, the bar’s length will be increased in the direction of the applied load, and stress (σ) is induced in the bar.

σ= P/A

According to Hooke’s law, longitudinal stress is directly proportional to longitudinal strain.

Hence,σ∝ε

So, σ=Eε

E= σ/ε

Formulas for GATE Mechanical Engineering – Machine Design

Bulk Modulus (K)

The bulk modulus of elasticity is an elastic constant showing a material’s incompressibility. When a body is subjected to three mutually perpendicular stresses of equal intensity (σ). Then the ratio of direct stress (σ) to the corresponding volumetric strain (ϵv) is defined as the bulk modulus (K) for the material of the body.

Which is generally denoted as ‘K’. Thus,

K = Direct Stress/Volumetric Strain= σ/εv

Volumetric strain: Volumetric strain is defined as the ratio of change in volume of an elastic body to its initial volume. For an equally stressed body in all three mutually perpendicular directions,

Volumetric strain = εv=ΔV/V=εxyz

Formulas for GATE Mechanical Engineering – Fluid Mechanics and Machinery

Modulus of Rigidity (G)

Modulus of Rigidity is an elastic constant that measures a deformable body’s rigidity.

The shear modulus or modulus of rigidity expresses the relation between shear stress and shear strain. Modulus of rigidity can be defined as the ratio of shear stress to shear strain.

G=Τ/φ

Shear strain (φ): Shear strain is defined as the angular deformation of the body when it is subjected to shear stress.

Poisson’s ratio (μ)

Poisson’s ratio is an elastic constant which is defined as the ratio of lateral strain to longitudinal strain. Poisson’s ratio is a unitless quantity, and it is generally denoted as μ or 1/m.

Poisson’s ratio = -Lateral Strain/Longitudinal Strain

Poisson’s Ratio values for different materials:

Material

Poisson’s ratio (μ)

Cork

0

Concrete

0.1 – 0.2

Metals

1/4 to 1/3

Rubber, Clay, Paraffin

0.5→ Behaves like a perfectly elastic material

Relation Between Different Elastic Constants

Among these four Elastic constants, three elastic constants can be related to each other.

These relations can be expressed below.

  • E=2G(1+μ)
  • E=3K(1-2μ)
  • E=9KG/(3K+G)

Some Important Facts about Elastic Constants

The value of any Elastic constants should be ≥ 0.

E, K, G > 0

µ ≥ 0 [because, µcork = 0]

So, for K to be positive, 1 – 2µ ≥ 0 ⇒µ ≤ 1/2

Hence for any engineered material, 0 ≤ µ ≤1/2

µ G K
Minimum Limit 0 E/2 E/3
Maximum Limit 1/2 E/3

Hence, we can say that

  • E/2≤G≤E/3 and E/3≤K≤∞
  • Asµ↓⇒G↓and K↑
  • G≤E

Materials based on Elastic Properties

Materials based on Elastic properties can be categorized as follows.

Homogeneous material

Homogeneous materials are those materials that have similar elastic properties in any of the directions at any point.

Homogeneous

Anisotropic Material

When a material exhibits different elastic properties in every direction at every point, then the material is known as Isotropic Material.

Fig. Anisotropic material

Anisotropic

Isotropic Material

When a material exhibits the Same elastic properties in any direction at a given point, then the material is known as Isotropic Material.

Isotropic

For complete information about the elastic constants, you can refer to the following video on Byju Exam Prep’s official youtube channel.

Orthotropic Material

When a material exhibits the Same elastic properties at the only orthogonal direction at a given point, then the material is known as Orthotropic Material.

The Independent elastic constant is the constant which is required to define the stress and strain relationships for a particular type of material. Here the number of independent elastic constants for some materials is given.

Type of Material

No. of Independent Elastic Constant

Isotropic

2

Orthotropic

9

Anisotropic

21

Important Topics for Gate Exam
2s Complement Acid Properties in Dbms
Angle of Contact Asynchronous Counter
Belt Drive Bending Moment
Bending Stress Boolean Theorems
Boundary Layer Bresenham Line Drawing Algorithm

GATE ME

Our Apps Playstore
POPULAR EXAMS
SSC and Bank
Other Exams
GradeStack Learning Pvt. Ltd.Windsor IT Park, Tower - A, 2nd Floor, Sector 125, Noida, Uttar Pradesh 201303 help@byjusexamprep.com
Home Practice Test Series Premium