Time Left - 10:00 mins
ESE ME: Theory of Machines & Vibrations Champion Quiz 5
Attempt now to get your rank among 658 students!
Question 1
The speed rating for turbine rotors is invariably more than times its natural frequency to
Question 2
Critical speed is expressed as
Question 3
The static deflection of a shaft under a flywheel is 4 mm. Taking g=10 m/s2, What is the critical speed in rad/s?
Question 4
Which one of the following causes whirling of shafts?
Question 5
Match List-I (property) with List-II (System) and select the correct answer using the code given below the lists:
List-I
A) Resonance
B) On-off control
C) Natural frequency
D) Feedback signal
List-II
1) Closed-loop control system
2) Free vibrations
3) Excessively large amplitude
4) Mechanical brake
List-I
A) Resonance
B) On-off control
C) Natural frequency
D) Feedback signal
List-II
1) Closed-loop control system
2) Free vibrations
3) Excessively large amplitude
4) Mechanical brake
Question 6
Figure shows a single degree of freedom system. The system consists of a massless rigid bar OP hinged at 0 and a mass m at end P. The natural frequency of vibration of the system is
Question 7
A single degree of freedom system has a mass of 2 kg, stiffness 8 N/m and viscous damping ratio 0.02. The dynamic magnification factor at an excitation frequency of 1.5 rad/s is ________
Question 8
The sleeve and each rotating mass of a porter governor weigh respectively, 200 N 50 N. If the friction at the sleeve is 10 N then the coefficient of detention would be _________.
Question 9
In a slider-bar mechanism, when does the connecting rod have zero angular velocity?
Question 10
In circular arc cam with a flat faced reciprocating follower, the contact between the follower and the nose of cam is only maintained if:
- 658 attempts
- 3 upvotes
- 34 comments
Jun 11ESE & GATE ME