Time Left - 20:00 mins

GATE CE: Concrete Structures Champion Quiz 3

Attempt now to get your rank among 692 students!

Question 1

Critical section for shear in case of flat slabs is

Question 2

A T-beam behaves as a rectangular beam of width equal to its flange if its neutral axis

Question 3

Drop panel is a structural component in

Question 4

The enlarged head of the supporting column of a flat slab is called

Question 5

Splicing of bars in RCC beams can be done at a section where

Question 6

A T-beam roof section has the following particulars:
Thickness of slab : 100 mm
Width of rib : 300 mm
Depth of beam : 500 mm
Centre to centre distance of
beams : 3.0 m
Effective span of beams : 6.0 m
Distance between points of
contraflexure : 3.6 m
What is the effective flange width of the T-beam?

Question 7

A doubly reinforced concrete beam has effective cover d’ to the centre of compression reinforcement.

is the depth of neutral axis, and ‘d’ is the effective depth to the centre of tension reinforcement. What is the maximum strain in concrete at the level of compression reinforcement?

Question 8

A square column section of size 350 mm × 350 mm is reinforced with four bars of 25 mm diameter and four bars of 16 mm diameter. Then the transverse steel should be

Question 9

A shear wall of length 5 m, height 3 m and thickness 250 mm has to resist the forces due to horizontal earthquake in its plane. The relevant Section Modulus of the wall section is

Question 10

In a R.C. section under flexure, the assumption the “a plane section before bending remains plane after bending” loads to

692 attempts
6 upvotes
40 comments

Tags :

ESE & GATE CE Structural Analysis

Aug 3ESE & GATE CE