Time Left - 20:00 mins
ISRO Mechanical Exam 2017: Weekly Toppers Quiz 1
Attempt now to get your rank among 1001 students!
Question 1
Aluminium crystal structure is
Question 2
Two particles with masses in the ratio 1:4 are moving with equal kinetic energies. The magnitude of their linear momentums will conform to the ratio
Question 3
A liquid compressed in cylinder has a volume of 0.04 m3 at 50 kg/cm2 and a volume of 0.039 m3 at 150 kg/cm2. The bulk modulus of liquid is
Question 4
In descending order of magnitude, the thermal conductivity of (a) pure iron, (b) liquid water, (c) saturated water vapour and (d) aluminum can be arranged as
Question 5
The process layout is best suited where
Question 6
The blank size of the gear of 3 mm module and 40 number of teeth is
Question 7
In a single point turning operation with a cemented carbide and steel combination having a Taylor exponent of 0.25, if the cutting speed is halved, then tool life will become _____.
Question 8
A bar of bronze and a bar of steel are placed between two immovable supports. A and B as shown in the figure. The physical constants are : (where L = Length of bars, A = cross-sectional area, = linear coefficient of thermal expansion, E = Young’s modulus)
The stresses in the steel and bronze, when temperature drops by 50 °C is
The stresses in the steel and bronze, when temperature drops by 50 °C is
Question 9
A stone of mass m at the end of a string of length l is whirled in a vertical circle at a constant speed. The tension in the string will be maximum when the stone is
Question 10
A system undergoes a state change form 1 to 2. According the second law of thermodynamics for the process to be feasible, the entropy change, S2-S1 of the system
Question 11
Following is a process used to form powder metal to shape
Question 12
Circulation is defined as the line intergral of tangential component of velocity about a ___________.
Question 13
The efficiency of Carnot engine is given as 80 %. If the cycle direction is reversed, what will be the value of COP of reversed Carnot cycle _________?
Question 14
The matrix A = is
Question 15
A solid steel shaft transmits 40 kW of power at a speed of (75/π) Hz. The initial torque needed in the shaft is __________.
- 1001 attempts
- 7 upvotes
- 29 comments
Tags :
ESE & GATE MEGeneralJul 1ESE & GATE ME