Time Left - 06:00 mins
SSC JE 2017: Basic Electrical & A.C Fundamentals Rankers Quiz 6
Attempt now to get your rank among 1110 students!
Question 1
The maximum power that can be delivered to the load RL in the circuit shown in Figure is
Question 2
An alternating current is given by
. The time taken to generate two cycles of current is
. The time taken to generate two cycles of current isQuestion 3
A coil is rotating in the uniform field of an 8-pole generator. Tri one revolution of the coil, the number of cycles generated by the voltage is
Question 4
When 200 V sinusoidal peak-to-peak wave is connected across an a.c. voltmeter, it will read……….
Question 5
In figure, the wave that will produce maximum heat under similar conditions is
Question 6
Two identical cells connected in series send 10 A through 
resistor. When they are connected in parallel, they send 8 A through the same resistor. The internal resistance of each cell is
resistor. When they are connected in parallel, they send 8 A through the same resistor. The internal resistance of each cell is Question 7
Three equal resistors are connected as shown in Fig. Find the equivalent resistance between points A and B.
Question 8
A 200 W and 100 W bulb both meant for operation at 220 V are connected in series. When connected to a 220 V supply, the power consumed by them is
Question 9
For maximum power transfer to RL in the circuit shown in Figure, the power dissipated in the Norton resistance is
Question 10
A 120 V source has a series internal resistance of 
. The maximum power that can be delivered to a load is
. The maximum power that can be delivered to a load is - 1110 attempts
- 3 upvotes
- 19 comments
Tags :
ESE & GATE EEGeneralMay 18ESE & GATE EE
