Time Left - 15:00 mins
GATE EE: 2018 Mini Mock 12
Attempt now to get your rank among 1161 students!
Question 1
A differential amplifier has an open circuit voltage gain of 100. This amplifier has a common input signal of 3.2V to both terminals and out put signal is 26mV.Determine the CMRR in dB
Question 2
In the silicon BJT circuit shown below, assume that the emitter area of transistor Q1 is half that of transistor Q2.
The value of current I0 in mA ?
Question 3
Find the z- transform (including the ROC) of the signal given x[n] =3nu[-n+3] ?
Question 4
A coil has an inductance of 5H and resistance 20Ω. An emf of 100 V is applied to it. What is the energy stored in the magnetic field, when the current has reached its final value
Question 5
If a vector is solenoidal which of the following is true.
Question 6
A spherical capacitor is formed using two concentric spherical conducting shells of radius 9 cm and 4 cm, separated by a nylon dielectric of . Determine the potential difference between the two spheres, if a charge of 55 µC is given to the inner sphere.
Question 7
Find digital equivalent obtained for an analog input of 2.896V, Conversion time and the resolution of the converter if the parameters of a counter type ADC are
Clock frequency = 1 MHz, comparator threshold =0.2 mV, full scale output of DAC used = 8.56, DAC inputs is 10 –bits?
Clock frequency = 1 MHz, comparator threshold =0.2 mV, full scale output of DAC used = 8.56, DAC inputs is 10 –bits?
Question 8
For the given open-loop transfer function of a feedback control system:
While plotting the root locus of the system, it was found that the breakaway point lies on the real axis between -1 and -2. Determine the breakaway point_____(s=?)
While plotting the root locus of the system, it was found that the breakaway point lies on the real axis between -1 and -2. Determine the breakaway point_____(s=?)
Question 9
A transistor is connected in CB configuration. When emitter voltage is changed by 100 m V, the emitter current changes by 10 m A, During this variation collector to base voltage is kept constant. Calculate the dynamic input resistance of the transistor______ (fill in the blanks).
Question 10
Consider the following program for 8085:
XRA A
LXI B, 0008 H
LOOP: DCX B
ADD A
JNZ LOOP
The LOOP will be executed
XRA A
LXI B, 0008 H
LOOP: DCX B
ADD A
JNZ LOOP
The LOOP will be executed
- 1161 attempts
- 3 upvotes
- 14 comments
Tags :
ESE & GATE EEGeneralJun 1ESE & GATE EE