Time Left - 08:00 mins
DMRC 2018 Civil Engineering Quiz 1
Attempt now to get your rank among 1192 students!
Question 1
If a descending gradient of 1 in 25 meets an ascending gradient of 1 in 40, then the length of valley curve required for a head light sight distance of 100 m will be(m)
Question 2
A method of differential leveling is used in order to find the differences in elevation between the two points when,
Question 3
In an instrument, the bubble tube with the divisions of 1mm and radius of 0.9m has sensity of?
Question 4
The degree of static indeterminacy of the hybrid plane frame as shown in figure is _______.
denotes hybrid joint
denotes hybrid jointQuestion 5
Determine the magnitude of the horizontal thrust from the following options. A three hinged symmetrical arch is shown below.
Question 6
Which of the following statements(s) is (are) correct?
i. In a tensile test on a specimen, true stress in the specimen is less than the nominal stress.
ii. Stress is a fundamental behavior of the material.
iii. The amount of elastic deformation at a certain point, which a bar of mild steel undergoes at a given stress is the same irrespective of the stresses being tensile or compressive (nature).
i. In a tensile test on a specimen, true stress in the specimen is less than the nominal stress.
ii. Stress is a fundamental behavior of the material.
iii. The amount of elastic deformation at a certain point, which a bar of mild steel undergoes at a given stress is the same irrespective of the stresses being tensile or compressive (nature).
Question 7
For cohesive soils, with increasing compactive effort, the optimum moisture content
Question 8
If the water content of a fully saturated soil mass is 100% then the void ratio of the sample is
Question 9
The clay mineral primarily governing the swelling behavior of Black Cotton soil is
Question 10
The purpose of seasoning of timber is to
- 1192 attempts
- 4 upvotes
- 26 comments
Tags :
ESE & GATE CEGeneralJun 17ESE & GATE CE
