Time Left - 12:00 mins

DMRC 2018 CE Technical Mini Mock

Attempt now to get your rank among 1010 students!

Question 1

The safety within a roundabout and the efficiency of a roundabout can be increased, respectively, by

Question 2

Which of the following is considered to be theoretical method of pavement design?

Question 3

If the difference in elevation of an edge of the pavement 9m wide and its crown is 15 cm, the camber of the pavement is

Question 4

Flexible pavements distribute the wheel loads

Question 5

The natural void ratio of a saturated clay strata, 5 m thick is 0.80. The final void ratio of the clay at the end of consolidation is expected to be 0.61. The total consolidation settlement of the clay strata is _________ cm.

Question 6

A fine–grained soil has 60% (by weight) silt content. The soil behaves as semi–solid when water content is between 15% and 28%. The soil behaves fluid–like when the water content is more than 40%. The ‘Activity’ of the soil is

Question 7

A reinforced cantilever beam of span 4 m. has cross-section of 150x500 mm. if checked for lateral stability and deflection, the beam will

Question 8

The reduction coefficient of a reinforced concrete column with an effective length of 4.8 m and size 250 x 300 mm is

Question 9

According to the concept of Limit State Design as per IS456: 2000, the probability of failure of a structure is __________.

Question 10

The length of hydraulic jump in rectangular channel is roughly

Question 11

The method of leveling in which heights of mountain are found by observing the temperature at which the water boils is known as

Question 12

A stream function is given by
Y = 2x² y + (x + l)y²
The flow rate across a line joining points A(3,0) and 6(0,2) is

Question 13

The e–lop p curve shown in the figure is representative of

Question 14

The total and effective stress (in kN/m²) at a depth of 8 m below the water surface level in a swimming pool are respectively given as

Question 15

The amount of CO₂ generated (in kg) while completely oxidizing one kg of CH₄ to the end products is ________ Kg.

1010 attempts
4 upvotes
15 comments

Tags :

ESE & GATE CE General

Jan 13ESE & GATE CE