Time Left - 10:00 mins

GATE CE 2019 STEEL STRUCTURE Revision Quiz 1

Attempt now to get your rank among 1354 students!

Question 1

Under low shear the bending strength of the beam is given by Md = βbZpfymo. For a semi compact section the value of βb is

Question 2

A beam with a concentrated load acting is shown below. Find the ultimate value of the load.

Question 3

In a frame ABCDE, two concentrated loads are applied at B and C. If the length L = 2 m and the plastic moment capacity of the frame is 200kNm. Find the maximum load P that can be applied.

Question 4

A steel column of ISHB 350 @ 72.4 kg/m is subjected to a factored axial compressive load of 2000 kN. The load is transferred to a concrete pedestal of grade M20 through a square base plate. Consider bearing of concrete as 0.45 where is the characteristic strength of concrete. Using limit state method and neglecting the self weight of base plate and steel column, the length of a side of the base plate to be provided is

Question 5

A double cover butt riveted joint is used to connect two flat plates of 250 mm width and 16 mm thickness as shown in figure. There are sixteen power driven rivets of 22 mm diameter at a pitch of 50 mm in both direction on either side of the plate. Two cover plates of 10 mm thickness are used. The capacity of the joint in tension (in kN) with permissible bearing and shearing stresses as 300 MPa and 100 MPa respectively, is
  • 1354 attempts
  • 4 upvotes
  • 2 comments
Jan 14ESE & GATE CE