Time Left - 15:00 mins
GATE 2020: Strength of Material Quiz 3 (App update required to attempt this test)
Attempt now to get your rank among 1295 students!
Question 1
For a loaded cantilever beam of uniform cross-section, the bending moment (in N.mm) along the length is M(x)=5x2+10x, where x is the distance (in mm) measured from the free end of the beam. The magnitude of shear force (in N) in the cross-section at x=10 mm is ___.
Question 2
For a simply supported beam named as A of length = l3 and another simply supported beam named B of length = l2. Both are loaded at central. Find the ratio of slope at the supports of A to maximum deflection of B
Question 3
A simply supported beam has the square cross-section having moment of inertia 1728 mm4. It carries a uniformly distributed load of intensity 10 N/m. Considering only the top fibre of beam, the correct representation of the longitudinal variation of the bending stress is (consider sagging B.M positive & compressive bending stress positive)
Question 4
A concentrated load F acts on a simply supported beam of span L at a distance L/4 from the left support the bending moment at the point of application of load is given by _________.
Question 5
An overhang beam with UDL with BMD (bending moment diagram), Find the value of 'a' (in m) corresponding to this BMD as shown in figure ?
Question 6
Find the vertical reaction at the point A as shown in figure.
- 1295 attempts
- 11 upvotes
- 13 comments
Jul 17ESE & GATE ME