Time Left - 15:00 mins

GATE CE 2020 Survey Quiz 4

Attempt now to get your rank among 761 students!

Question 1

The objective should be focussed in which of the cases listed below.
i. Parallax
ii. Aberration
iii. Indistinct focussing
iv. None of the above

Question 2

In a tachometric surveying the levelling staff is observed with an object glass of focal length 250mm. Determine the distance between the staff and the instrument station when the distance between the vertical axis of the tachometer and the optical center of object glass is 112mm. Consider the spacing between the upper and lower line of diaphragm axis as 3.7mm and the observed staff readings are 1.1m, 2.3m and 3.12m.

Question 3

Find the radius of curvature of bubble tube of each 2 mm from the average reading of the ends of the bubble and of a staff 80 m away.

Question 4

What is the distance between the line of sight and the trunnion axis the hypotenuse distance for a tachometric instrument of height 1.5m is fitted with an internal focusing telescope and positioned at a reduced level of 105.5m? The instrument focusses a vertically held staff at an angle of 5 °12’. The staff readings are 1.31m, 2.12m, and 3.23m. Assume the value of the additive constant to be 8 cm and multiplying constant as 1230.

Question 5

For a vertically held staff, if the angle of elevation is 300 and horizontal distance between observer and staff station is 100 m. staff intercept will be-
(take multiplying constant = 100 & additive constant = 30)

Question 6

If the bubble tube of a level has a sensitiveness of 35 per 2 mm division, find the error in staff reading on a vertical staff at a distance of 100 m caused by the bubble bending 3/2 divisions out of centre.
  • 761 attempts
  • 3 upvotes
  • 2 comments
Oct 20ESE & GATE CE