Time Left - 20:00 mins
GATE 2020 Topper's Quiz-5 (App update required to attempt this test)
Attempt now to get your rank among 668 students!
Question 1
For a system given its transfer function C(s)/R(s) = 9/(s2+6s+9), the nature of the time response will be:
Question 2
In the following figure C1 = 3μf, C2 = 5 μf, C3 = 2μf. These capacitors are connected with a battery of e.m.f = 2V. The energy (in μJ) lost by battery in charging the capacitor is
Question 3
A delay of a pulse train by (2n-1) no of clock pulses and only one clock pulse is used for storing data are observed respectively in
Question 4
In the figure in 
is plotted as a function of 1/T, where 
the intrinsic resistivity of silicon, T is is the temperature, and the plot is almost linear.
The slope of the line can be used to estimate
is plotted as a function of 1/T, where the intrinsic resistivity of silicon, T is is the temperature, and the plot is almost linear. The slope of the line can be used to estimate
Question 5
The response of the system 
to the unit step input 
the value of 
at t=0+ is
to the unit step input the value of at t=0+ isQuestion 6
What is the minimum number of 
Multiplexer required to realize a 
Multiplexer? ____________.
Multiplexer required to realize a Multiplexer? ____________.Question 7
Maxwell’s equation 
= ρV becomes ______________ in free space because:
= ρV becomes ______________ in free space because:Question 8
Two media 1 and 2 are separated by x-y plane. Medium 1(z > 0,
) has electric field 
V/m. what will be the electric field in medium 2 (z < 0, 
).
) has electric field V/m. what will be the electric field in medium 2 (z < 0, ). Question 9
Which of the following statements are true about the Hall Effect experiment and the results obtained from it.
I. It is used to distinguish between n -type and p-type semiconductor
II. It is used to calculate majority carrier concentration and mobility.
III. Force on electron in the direction given by the vector B
v.
IV. The Hall voltage is positive for n-type semiconductor.
I. It is used to distinguish between n -type and p-type semiconductor
II. It is used to calculate majority carrier concentration and mobility.
III. Force on electron in the direction given by the vector B
v. IV. The Hall voltage is positive for n-type semiconductor.
Question 10
We require ………… bits to represent a 32 digit decimal number
- 668 attempts
- 5 upvotes
- 8 comments
Tags :
ESE & GATE ECGeneralMar 31ESE & GATE EC
