Time Left - 08:00 mins
Application of Thermodynamics Quiz 1
Attempt now to get your rank among 860 students!
Question 1
Calculate the efficiency of given Brayton cycle
Question 2
In the air cycle refrigeration system ______.
Question 3
In a Diesel cycle, cut off takes place at 9% of stroke volume if the compression ratio is 16 then what will be the expansion ratio?
Question 4
In engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40,000 kJ/kg, then what is the fuel consumption?
Question 5
In a steam power plant, two cycles are coupled in series, where the first cycle has an efficiency of 30% and the second cycle has an efficiency of 20%. Determine the combined overall cycle efficiency:
Question 6
In Rankine cycle, when the steam pressure in boiler increases keeping maximum temperature unchanged
Question 7
What is the specific steam consumption (in kg/kWh) of the Rankine cycle based on net output if the enthalpies at turbine inlet and exit are 3200 kJ/kg and 2050 kJ/kg respectively. Specific work by pump is 1.5 kJ/kg.
Question 8
If the heat rejection factor is 1.5. What will be the COP______?
Question 9
The entry nozzle angle of an elementary Impulse turbine is . For maximal diagram efficiency, calculate the ratio
Question 10
Air at 15°C DBT, 60% of relative humidity is heated to 45°C using an electric heater. The surface temp. of the coil is 55°C. Then what will be contact factor of heating coil.
- 860 attempts
- 3 upvotes
- 3 comments
May 5ESE & GATE ME