Time Left - 08:00 mins
RCC Quiz 3
Attempt now to get your rank among 1294 students!
Question 1
The effective width of a column strip of a flat slab is
Question 2
In limit state design of reinforced concrete, deflection is computed by using
Question 3
If simply supported concrete beam, prestressed with a force of 2500kN, is designed by load balancing concept for an effective span of 10m and to carry a total load of 4OkN/m, the central dip of the cable profile should be:
Question 4
The maximum per cent of moment redistribution allowed in RCC beams is
Question 5
A RCC beam of 200 mm width and 300 mm effective depth is reinforced with Fe415 grade steel. The grade of concrete used is M20. The limiting moment carrying capacity of this beam is
Question 6
In a pre-stressed member, it is advisable to use
Question 7
The deflection including the effects of temperature, creep and shrinkage occurring after erection of partitions and the application of finishes should not exceed
Question 8
What is the anchorage value of a standard hook of a reinforcement bar of diameter D?
Question 9
The codal provision recommends minimum shear reinforcement in the form of stirrups in the beam
1. To cater for any torsion in the beam section
2. To improve ductility of the cross section
3. To improve dowel action of longitudinal tension bar.
Select the correct answer using the codes given below:
1. To cater for any torsion in the beam section
2. To improve ductility of the cross section
3. To improve dowel action of longitudinal tension bar.
Select the correct answer using the codes given below:
Question 10
A RC column 4 m long and 400 mm in dia is reinforced by 8 bar of the 20 mm dia, find the safe load, the column can carry
- 1294 attempts
- 4 upvotes
- 10 comments
Tags :
ESE & GATE CEGeneralSep 19ESE & GATE CE