Time Left - 08:00 mins

SSC JE 2019-20: Technical Quiz 50

Attempt now to get your rank among 1130 students!

Question 1

A reinforced concrete beam, supported on columns at ends, has a clear span 5m, and 0.5 m effective depth. It carries a total uniformly distributed load 100 KN/m. The design shear force for the beam is :

Question 2

Calculate the effective flange width of the following T-beam:
Thickness of slab = D1=100mm
Width of rib = B =300mm Depth of beam = D =500mm Centre to center distance of beam = 3.0mm Effective span of beam = 6.0mm Distance between points of contra flexure =1 = 3.6m

Question 3

The maximum area of compression reinforcement in a beam is

Given that d = effective depth,b = width and D = overall depth,

Question 4

The limits of percentage of the longitudinal reiforcement in a column is:

Question 5

A sample of saturated clay has a porosity of 0.562. The void ratio of the clay is

Question 6

The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes

Question 7

The process by which a mass of saturated soil is caused to suddenly loose its shear strength in response to an applied stress, usually earthquake shaking or other sudden change and to behave as fluid is called

Question 8

Maximum principal stress theory for the failure of a material at elastic limit is known as

Question 9

Pick up the correct statement from the following

Question 10

Pick up the incorrect statement from the following:

The torsional resistance of a shaft is directly proportional to

  • 1130 attempts
  • 0 upvotes
  • 8 comments
Feb 18ESE & GATE CE