Time Left - 30:00 mins
GATE2021: Structural Analysis Rapid Mini Mock (App update required to attempt this test)
Attempt now to get your rank among 573 students!
Question 1
The kinematic determinacy of the portal frame consider members are inextensible is ?
Question 2
The members EJ and IJ of a steel truss shown in figure below are subjected to a temperature rise of 40°C. The coefficient of thermal expansion of steel is 0.000012℃-1/l. The displacement (mm) of joint E relative to joint H along the direction HE of the truss is ____________.
Question 3
A cable of length 20m is supported at two ends at same level as shown in figure. The Horizontal distance between the supports is 16m. A pt. load of 100 kN is applied at pt. R which divides it into equal parts.
Neglecting the self wt. of the cable, the tension (in kN) in the cable due to applied load will be __________
Question 4
Identify the correct deflected shape corresponding to the loading in the plane frame shown below:
Question 5
There is a beam ABC 10 m long which is fixed at end C. The span AB supports a uniform load of 10 kN/m and a point load 50 kN acts at the middle of the span BC. The end C has an anticlockwise rotation and the end A settles down by .
What is the rotation of end A?
What is the rotation of end A?
Question 6
A cantilever of length 4 m carries a load of 4 kN at free end and 6 kN at its center. If EI is the flexural rigidity of the cantilever, then the slope at the free end of the cantilever _____ x 10-3 radian.
[ Teke EI = 14000 kN-m2]
[ Teke EI = 14000 kN-m2]
Question 7
A flexible cable weighing 20 N/m hangs between two supports 60 metres horizontally apart. The left support is 10 metres below the right support. The cable also supports a point load of 1000 N at a point 20 metres horizontally from the left support and 4 metres below this support. Assuming that the weight of the cable is spread uniformly on the horizontal span, the maximum tension (in kN) deleloped in the cable is
Question 8
A homogeneous, simply supported beam of width B, depth D, span L is subjected to concentrated load of magnitude P. The load can be placed anywhere along the span of beam. The max. flexural stress developed in beam is X (PL/BD2); X is _____
Question 9
A udl of 15 kN/m and length 3m rolls over a simply supported span of 10m length.The maximum bending moment at a section 4m from the right end will be_____kN-m.
Question 10
For a fixed beam ABCD with fixed ends A and B, the free bending moment diagram due to load is shown below. If the fixing moment at end B is 222.22 kN-m, then the fixing moment at A is ________ kN-m.
Question 11
For the above truss, the member AC is large by 2mm. The magnitude of vertical displacement of joint C is____________ mm.
All member of the truss is made of same material having axial rigidity AE.
Question 12
For the beam shown below, the value of the support moment M is __________ kN–m.
- 573 attempts
- 3 upvotes
- 3 comments
Dec 11ESE & GATE CE