Time Left - 08:00 mins
DFCCIL_CE _Quiz 28
Attempt now to get your rank among 764 students!
Question 1
The design shear strength in reinforced cement concrete depends on-
A) Characteristic strength of concrete
B) Percentage of longitudinal tensile reinforcement
C) Characteristic strength of steel
A) Characteristic strength of concrete
B) Percentage of longitudinal tensile reinforcement
C) Characteristic strength of steel
Question 2
A 500mm deep beam of 300mm wide is subjected to a shear force of 100kN and torsion 30 kN.m, the equivalent shear is:
Question 3
A RC beam is subjected to a bending moment of 200 KNm, shear force of 20 KN and a torque of 9 KNm. The size of the beam is 300 mm width x 425 mm depth. The effective cover is 25 mm. The equivalent moment is?
Question 4
Additional longitudinal bars shall be provided in beams subjected to torsion if depth of beam exceeds:
Question 5
Read the following statement
I. For deformed bars conforming to IS 1786, Permissible values of bond stress shall be increased by 60%
II. For bars in compression, the Permissible values of bond stress in tension shall be increased by 25%.
III. For bars in compression, the Permissible values of bond stress in tension shall be increased by 60%
Which of the below options is correct
I. For deformed bars conforming to IS 1786, Permissible values of bond stress shall be increased by 60%
II. For bars in compression, the Permissible values of bond stress in tension shall be increased by 25%.
III. For bars in compression, the Permissible values of bond stress in tension shall be increased by 60%
Which of the below options is correct
Question 6
A beam is built using M25 concrete and Fe-250 bars of 16 mm dia bars. In limit state design, the development length, Ld, in terms of diameter of reinforcement, for compression zone is _______ mm.
[ τbd = 1.4 N/mm2]
[ τbd = 1.4 N/mm2]
- 764 attempts
- 2 upvotes
- 7 comments
Tags :
AE & JE ExamsFeb 6AE & JE Exams