Time Left - 15:00 mins
GATE 2022 : Measurements Quiz- 76
Attempt now to get your rank among 222 students!
Question 1
Output reading of moving iron ammeter for sawtooth wave having maximum value of 400 A and 10 × 10–3 sec time period is ______ A .
Question 2
The value of limiting error in measurement of resistance is ± _____%, if timing error of power and current measurement is 2.5% and 1.25% respectively.
Question 3
For a PMMC type instrument, consider the following parameters:
Full scale deflection = 50 μA
Meter resistance = 1000 Ω
This PMMC is employed as voltmeter with 60 V range. Then the value of multiplier resistance is ________kΩ.
Question 4Multiple Correct Options
For moving coil instrument, carrying a current of 10 mA. Consider the following parameters:
Flux Density = 0.1 Wb/m2
Depth of coil = 30 × 10–3 m
Width of coil = 20 × 10–3 m
Number of turns = 100
Control spring constant = 2 × 10–6 Nm/degree
Then Choose the correct option(s):
Question 5Multiple Correct Options
For a balanced 3-phase circuit, two-wattmeter method shows W1 and W1/4 values. If W1 = 2000 Watts, then choose the correct option(s):
Question 6
In the above figure load is supplied through a 440 V, 50 Hz, 3 phase balanced supply. the current coil of the wattmeter is connected in the branch in between R and Y phase also the pressure coil of the wattmeter is connected in between Y and b phase. The phase sequence is RYB, find the reading of the wattmeter for the connection shown in figure below:
- 222 attempts
- 0 upvotes
- 1 comment
Sep 9ESE & GATE EE