CE Quiz 17

Load is applied through the shear center of the structure. The structure is subjected to

A thin cylindrical pressure vessel of diameter 10 cm carries fluid at an internal pressure P. The thickness of the wall of the vessel is 0.2 cm. If the ultimate strength of the material of the vessel is 3200 kg/cm², the bursting pressure (in kg/cm²)will be:

The moment of inertia about the x axis of a circular section of diameter 4cm is:

Internal fluid pressure P acts on a thin cylindrical steel pressure vessel of diameter 50mm and a wall thickness of 0.4cm. The ultimate strength of the steel is 3500 kg/cm². Determine the bursting pressure.

Determine the ratio of hoop stresses in a closed cylindrical thin vessel to that of a spherical thin vessel. Both vessels have the same internal diameter and wall thickness and are subjected to equal internal fluid pressure.

The maximum deflection of a cantilever beam of length 2 m with a point load 50 kN at its free end is

The maximum deflection due to a uniformly distributed load w/unit length over entire span of a cantilever of length l and of flexural rigidity EI, is

 For the beam shown in figure the magnitude of the vertical reaction at ‘A’ is