CE Quiz 33

The purpose of lateral ties in RC column is to

Helically reinforced columns will have ______   load carrying capacity than/as that of tied columns.

The minimum area (in mm²) of longitudinal steel required for an axially loaded square column of size 400 mm x 400 mm is:

The ends of an RCC column is rigidly connected to the slab and to the foundation. The column will behave as a/an ___________ if the length of the column is 5 m and its cross section is 500 mm x 500 mm.

An RCC column of circular cross-section and length L runs along two stories. The ends of the column is restrained in position and direction. The effective length of the column is

Helically reinforced columns will have ______   load carrying capacity than/as that of tied columns.

If the storey height is equal to length of RCC wall, the strength of wall is increased by ----- percentage

The minimum eccentricity for design of column as per IS: 456-2000 is

The cross-sectional area of longitudinal reinforcement in column shall not be less than ____ nor more than _____ of the gross cross-sectional area of column

An axially loaded square column of size 300 mm x 300 mm has an effective length of 3 m. The minimum eccentricity as per IS 456:2000 is ______.