Time Left - 08:00 mins
MP Sub-Engineer ME: Computer Integrated Manufacturing Quiz 28
Attempt now to get your rank among 64 students!
Question 1
The manual part programming is done in
Question 2
In MCU (Machine Control Unit) of codes written for a CNC machines. What does the letter H stands for?
Question 3
Aviation industries uses which type of manufacturing technology to produce aircrafts parts with high degree of accuracy and reliability?
Question 4
There are two types of CNC motion PTP (Point to Point) and contour motion. Which of the following is an example of a point to point motion in a CNC programming?
Question 5
Match the following
Question 6
A CNC part programming on a block is given by
M020 G02 X45.0 Y25.0 R5.0
The tool motion during the execution of the part programme will be
Question 7
In CNC machining, which of the following denotes the process of moving the tool from one point to the other, along a pre-defined path?
Question 8
List 1 shows the codes of CNC machine and list 2 shows the functions associated with them. Match the two accordingly
List-1
P). G 33
Q). G 35
R). G91
S). G 80-89
List-2
1). Incremental input dimensions
2). Canned cycles
3). Constant lead thread cutting
4). Linearly decreasing lead thread cutting
Question 9
Consider the following statements regarding homogeneous coordinate transformation matrix:
1) A homogeneous transformation matrix can be considered to consist of four sub-matrices.
2) The upper left 3 x 3 sub-matrix represents the position vector.
3) The upper right 3 x 1 sub-matrix represents the rotation matrix.
4) The lower left 1 x 3 sub-matrix represents perspective transformation. Which of the above statements are correct?
1) A homogeneous transformation matrix can be considered to consist of four sub-matrices.
2) The upper left 3 x 3 sub-matrix represents the position vector.
3) The upper right 3 x 1 sub-matrix represents the rotation matrix.
4) The lower left 1 x 3 sub-matrix represents perspective transformation. Which of the above statements are correct?
Question 10
The method of CNC programming which enables the programmer to describe part geometry using variables is
- 64 attempts
- 0 upvotes
- 3 comments
May 3AE & JE Exams